3U XMC Carrier
VPX 3U XMC PCB in mechanical carrier
Introduction
The 3U VPX XMC Carrier is a rugged conduction cooled single slot 3U VPX XMC Carrier that can connect one XMC module to a standard VPX backplane using PCIexpress 1x 8lane or 2x4 lane configurations.
A XMC module can therefore have two PCIexpress chips on board without using an additional switch on the XMC board. A onboard DC/DC converter generates +/-12V for analog circuitry on the VPX module. The 3U VPX XMC Carrier can supply additional supply voltages using two PMC connectors.
3U VPX 64-Bit 133MHz PMC Carrier Block Diagram:
PMC Connectors
The PMC site includes one PMC I/O connector for additional power.
ORDERING INFORMATION:
- PCI_300.154
For technical specifications please ask your representative for the DATASHEET or fill out the request form here.
3U Intel Core I7
VPX 3U Conduction Cooled CPU Board / Rev 0.2
The 3U VPX I7 CPU Board features:
- 10 Gigabit Ethernet
- USB 2.0, SATA, RS-232/RS-422/RS-485
- WindRiver VxWorks, Linux and MS-Windows
- Intel® Core™i7-610E, -620LE, and -620UE
- 3U VPX (VITA 46) module
- Up to 8 GB of DDR3-1066 ECC SDRAM in two channels
- 8 MB NOR boot flash
- 265 GB SATA drive
- OpenVPX™ Design
- Ruggedized VITA 48 (REDI) compatible
- Conduction cooled
- MIL-Bus Interface
Introduction
The 3U VPX I7 CPU board is a high-speed 3U OPEN VPX single-board computer, based on the Intel® Core™i7 processor. It features two ports with 4x PCI Express lanes each and one 10Gigabit Ethernet port.
The 3U VPX I7 features a MILbus chip and has a 256GB SSD SATA boot disk onboard.
This board is available with Amphenol Backplane Systems VITA 46 / 48 compliant VIPER™ VPX connectors. This is an extremely ruggedized 10Gbps connector, securing tomorrow’s most intensive land based, marine and avionics environmental packaging challenges.
ORDERING INFORMATION:
- PCI_100.200.1.06 MHz
- PCI_100.200.2.00 MHz
- PCI_100.200.2.53 MHz
For technical specifications please ask your representative for the DATASHEET or fill out the request form here.